Look for a future blog discussing tools for the installation of rivet nuts.įor more shopping options click here. If you are currently using weld nuts, or have areas with limited access to one side, consider looking at rivet nuts. There is also a high strength version of ecosyn®-BCT which may be used in structural joints and can create high clamp loads for use with high strength bolts. Specialty type rivet nuts exist, such as the ecosyn®-BCT which employ bulge control technology to allow them to work in blind holes and/or soft materials such as plastic. The bulge formed on the backside must have unrestricted space to form and will apply pressure to the plate which could overly stress plastic or wood.
#RIVET NUT FOR WOOD SERIES#
Standard rivet nuts must be used with through holes in harder materials such as steel or aluminum and do not work as well in softer materials like wood or plastic. To prevent corrosion, Sherex treated the rivet nut with our CR series corrosion resistant plating which offers over 1,000 hrs of protection during a salt spray test. These standard nuts are not high strength and generally cannot support enough clamp load for structural joints. Standard rivet nuts have been around for years, and work well as attachment points for low strength joints that do not see much stress. The nuts are placed into the hole and ‘upset’ on the backside (much like a blind rivet) which secures them, eliminating the need for a wrench. Screwdrivers Tap & Die Sockets, Ratchets & Mechanics Tools Staples, Rivet & Hot Glue Wrenches & Pliers. A special installation tool is required to ‘set’ the nuts into the prepared hole. Further, zinc plating types also vary in their ability to protect from both “red” (iron-related) and “white” (alloy related) corrosion types.A rivet nut is a special type of nut that is installed into a prepared hole in a piece of sheet metal and secured prior to assembly of a bolt. A rivet nut, also known as a threaded insert or a blind rivet nut, is a mechanical fastener that, as the name suggests, is a variation of the standard rivet. Zinc plating comes in different colors – but each of the colors can result from the type of plating formulation used – meaning that they do not necessarily have the same resulting corrosion resistance properties as each other.
Zinc Plated coatings are “sacrificial” coatings – meaning the coating sacrifices itself in order to protect the substrate beneath, as the coating oxidizes the corrosion itself continues to provide a level of protection to the substrate. The primary purpose of zinc plating is to protect metals from the effects of corrosion or rust. The majority of hardware parts are zinc-plated, rather than cadmium-plated. Indeed, the zinc oxide, if undisturbed, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not cause a breakdown of the substrate’s surface integrity as it is formed.
Zinc coatings prevent oxidation of the protected metal by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Ever Hardware provides custom-made blind nuts for wood and customizable packaging. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden workpiece as the bolt is tightened from the opposite side of the piece, providing better retention. It has a long, thin body and a flange at one end, resembling a T in profile.
The blind nuts for wood are also known as T-nut, T nut, or tee nut (also known as a blind nut, which can however also refer to a rivet nut or an insert nut) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.
0 kommentar(er)
